Air Compressor Oil Separator
The formation of oil droplets is concentrated at the bottom of the filter core and returned to the compressor lubrication system by the return oil pipe, so that the air compressor is discharged more pure compressed air.
Built-In Oil separator：
The service life：4000hours
The air compressor oil separator is to intercept and polymerized oil mist in the gas. The formation of oil droplets is concentrated at the bottom of the filter core and returned to the compressor lubrication system by the return oil pipe, so that the air compressor is discharged more pure compressed air.
When installing and replacing the MANFEITE oil filter element, ensure the cleanliness of the oil side and the oil filter element on the drying side of the separating tank. When air compressor oil consumption increases and efficiency decreases, check whether oil filters and pipes, return pipes are clean and blocked. When checked, the natural aging of the oil filter element needs to be replaced in time. When the pressure difference between the two ends is 0.15MAP or the pressure difference is 0, the surface filter core is faulty or airflow short circuit, and it should be replaced in time.
MANFEITE oil filter element generally takes about 5000 hours. When the working environment is poor, the service life of the oil filter element will be shortened. All used oil must be replaced to avoid the adverse reaction and damage of the air compressor due to the non phase shifting between the brand of the oil, the residual oil and the new oil exchange.
Two points need special attention when installing an air compressor station.
First ：The air compressor, air storage tank, dryer, filter, the distance between each equipment must be placed well, the distance between the air compressor and the air tank should not be less than 50 cm. The connection of gas storage tanks follows the principle of low inlet and high outlet. The distance between the storage tank and the primary filter is preferably not less than 40 centimeters. The primary filter should not be less than 40 centimeters between the dryer and the dryer. The dryer and the rear precision filter should also reach more than 40 centimeters. Because the distance is too small, it will bring trouble to repair the equipment in the future.
Second : When placing these equipment, the linear distance from the wall of the four sides of the air compressor room should be kept at least 100 cm, which is the minimum space distance to be kept for the convenience of the maintenance equipment.
And the air compressor room to maintain good ventilation, when necessary to install the exhaust fan, all this is to maximize the function of the air pressure station, to the maximum to ensure the working life of the air compressor!
Our company specializes in industrial filters, filter cartridges, oil filters, air filters, oil separator cores, precision filters, etc. It has more than twenty years of production experience, strong technical force, excellent production facilities and perfect detection methods. Our company can provide users with different specifications of oil-gas separator core according to the actual needs of users.