Air Compressor Separator Filter 1613955900/2901077400/1613984000
Brand：MANFEITE P/N：SS2736 (Suitable For Atlas copco compressor 1613955900/2901077400/1613984000) Type：Atlas air compressor spare parts air oil separator kit Applicable models:For Atlas copco Compressor GA55 75 90C GA90CP ect. Dimension：Φ365*H274，8 holes on the flange
SS2736 (Suitable For Atlas copco compressor 1613955900/2901077400/1613984000)
Atlas air compressor spare parts air oil separator kit
For Atlas copco Compressor GA55 75 90C GA90CP ect.
Φ365*H274，8 holes on the flange
-10 ~ +100℃
Imported fiber glass media from USA HV&Lyd
About 4000h (Depending on the working environment）
Generally plastic bag inside and carton outside, or as your requirement
During the operation of the oil separator, the normal pressure difference of the newly installed oil separator should be 0.17-0.3 bar for the first time, it is abnormal when it exceeds 0.3 bar. At this point, the minimum pressure valve of the air compressor or other parts of the air system should be checked for damage.
In the process of using the oil separator, it is abnormal that the pressure difference of the oil separator is too large in a short time, and the pressure difference of the oil separator is more than 0.8 bar. At this time, it is necessary to check whether the air system of the air compressor has short circuit phenomenon, and also to check whether the air filter used by the air compressor can filter 5-6um impurities to 95%, in 7-10um impurities to 99.8% of the effect. Otherwise the pressure difference of the oil separator will be more than 0.8bar in advance. In addition, the air compressor after the overhaul of the compressed air system and oil system clean, air compressor two major systems have no obvious fault will cause excessive pressure difference in the early use of oil and gas separator core.