Replacement Oil Mist Filters for Compressor
The oil mist filter has wide application scope and is suitable for collection and purification of various water-soluble and oily mist.
The oil mist filter has wide application scope and is suitable for collection and purification of various water-soluble and oily mist. The filter core is mainly composed of ultra-fine fiber and glass fiber material, and the two ends are sealed by rubber. The filter area is large and the filter core has a metal skeleton
it can be separated from the main pipe filter and air filter by 0.3~0.5μm, gaseous sol particles and rust and carbon particles larger than 0.3 μm. The most suitable source is the electromagnetic pilot valve and the gap seal spool valve.
compressed air flows from the inlet to the inner side of the filter core and then flows to the outside. The oil particles entering the fiber layer are intercepted and interacted by their motion inertia, or particles collide with multi-layer fibers and are adsorbed by fibers. The smaller particle Brown movement is adsorbed by the fiber, and the more outward, the particles gradually increase and become liquid, condensing on the surface of a special foam plastic layer and flowing down to the bottom of the cup under the action of gravity to be discharged.
It can be used for cutting oil, emulsion and synthetic coolant produced by processing oil mist and water mist.
CNC CNC lathe, machine tool, cleaning machine, outer circle, plane, no heart grinder, hobbing, milling machine and gear cutting machine, vacuum pump, spray test room, EDM, NC machining center.