Ingersoll Rand Compressor Oil Separator Replacements
The compressed air compressed from the main head of the screw air compressor is filled with large and small oil droplets, and the large oil droplets are easily separated through the oil and gas separator
The service life：4000 hours
The compressed air compressed from the main head of the screw air compressor is filled with large and small oil droplets, and the large oil droplets are easily separated through the oil and gas separator, while the small oil droplets must be filtered through the micrometer glass filter layer of the oil and gas separator.
The effect of intercepting, dispersing and polymerizing oil mist can reach the best result. Large droplets quickly gathered by small droplets accumulate through the filter layer at the bottom of the filter, driven by air and gravity. These oils are continuously returned to the lubrication system by importing the oil return pipe at the bottom recess of the filter element. So that the compressor can discharge more pure and high quality oil-free compressed air.
The oil and gas separator cores independently developed by our factory use different filter media, which has high filtration efficiency, strong dust capacity, small pressure drop and can design different installation methods,It is your choice.
Causes and solutions for reducing air compressor discharge volume:
1, air valve leakage, grinding repair or replacement of new parts.
2, piston ring, scraper ring, cylinder wear too much, replace worn parts.
3. The air filter is clogged, the airway is leaked, the dust under the filter is removed, and the pipeline is repaired.
4, the piston top stop point clearance is too large, reduce the cylinder gasket, reduce the clearance volume.
5, the air compressor speed is lower than the rated speed, check the line voltage, frequency maintenance or replacement of the motor.